from pyroute2.common import map_namespace
# ARP protocol HARDWARE identifiers.
ARPHRD_NETROM = 0 # from KA9Q: NET/ROM pseudo
ARPHRD_ETHER = 1 # Ethernet 10Mbps
ARPHRD_EETHER = 2 # Experimental Ethernet
ARPHRD_AX25 = 3 # AX.25 Level 2
ARPHRD_PRONET = 4 # PROnet token ring
ARPHRD_CHAOS = 5 # Chaosnet
ARPHRD_IEEE802 = 6 # IEEE 802.2 Ethernet/TR/TB
ARPHRD_ARCNET = 7 # ARCnet
ARPHRD_APPLETLK = 8 # APPLEtalk
ARPHRD_DLCI = 15 # Frame Relay DLCI
ARPHRD_ATM = 19 # ATM
ARPHRD_METRICOM = 23 # Metricom STRIP (new IANA id)
ARPHRD_IEEE1394 = 24 # IEEE 1394 IPv4 - RFC 2734
ARPHRD_EUI64 = 27 # EUI-64
ARPHRD_INFINIBAND = 32 # InfiniBand
# Dummy types for non ARP hardware
ARPHRD_SLIP = 256
ARPHRD_CSLIP = 257
ARPHRD_SLIP6 = 258
ARPHRD_CSLIP6 = 259
ARPHRD_RSRVD = 260 # Notional KISS type
ARPHRD_ADAPT = 264
ARPHRD_ROSE = 270
ARPHRD_X25 = 271 # CCITT X.25
ARPHRD_HWX25 = 272 # Boards with X.25 in firmware
ARPHRD_PPP = 512
ARPHRD_CISCO = 513 # Cisco HDLC
ARPHRD_HDLC = ARPHRD_CISCO
ARPHRD_LAPB = 516 # LAPB
ARPHRD_DDCMP = 517 # Digital's DDCMP protocol
ARPHRD_RAWHDLC = 518 # Raw HDLC
ARPHRD_TUNNEL = 768 # IPIP tunnel
ARPHRD_TUNNEL6 = 769 # IP6IP6 tunnel
ARPHRD_FRAD = 770 # Frame Relay Access Device
ARPHRD_SKIP = 771 # SKIP vif
ARPHRD_LOOPBACK = 772 # Loopback device
ARPHRD_LOCALTLK = 773 # Localtalk device
ARPHRD_FDDI = 774 # Fiber Distributed Data Interface
ARPHRD_BIF = 775 # AP1000 BIF
ARPHRD_SIT = 776 # sit0 device - IPv6-in-IPv4
ARPHRD_IPDDP = 777 # IP over DDP tunneller
ARPHRD_IPGRE = 778 # GRE over IP
ARPHRD_PIMREG = 779 # PIMSM register interface
ARPHRD_HIPPI = 780 # High Performance Parallel Interface
ARPHRD_ASH = 781 # Nexus 64Mbps Ash
ARPHRD_ECONET = 782 # Acorn Econet
ARPHRD_IRDA = 783 # Linux-IrDA
# ARP works differently on different FC media .. so
ARPHRD_FCPP = 784 # Point to point fibrechannel
ARPHRD_FCAL = 785 # Fibrechannel arbitrated loop
ARPHRD_FCPL = 786 # Fibrechannel public loop
ARPHRD_FCFABRIC = 787 # Fibrechannel fabric
# 787->799 reserved for fibrechannel media types
ARPHRD_IEEE802_TR = 800 # Magic type ident for TR
ARPHRD_IEEE80211 = 801 # IEEE 802.11
ARPHRD_IEEE80211_PRISM = 802 # IEEE 802.11 + Prism2 header
ARPHRD_IEEE80211_RADIOTAP = 803 # IEEE 802.11 + radiotap header
ARPHRD_MPLS_TUNNEL = 899 # MPLS Tunnel Interface
ARPHRD_VOID = 0xFFFF # Void type, nothing is known
ARPHRD_NONE = 0xFFFE # zero header length
(ARPHRD_NAMES, ARPHRD_VALUES) = map_namespace("ARPHRD_", globals())
