$40 GRAYBYTE WORDPRESS FILE MANAGER $23

�
7��ec@shdZd
Z
def
d��YZdef
d��YZdef
d��YZdef
d	��YZd
S(seDEPRECATED:  Declares the RPC service interfaces.

This module declares the abstract interfaces underlying proto2 RPC
services.  These are intended to be independent of any particular RPC
implementation, so that proto2 services can be used on top of a variety
of implementations.  Starting with version 2.3.0, RPC implementations should
not try to build on these, but should instead provide code generator plugins
which generate code specific to the particular RPC implementation.  This way
the generated code can be more appropriate for the implementation in use
and can avoid unnecessary layers of indirection.
spetar@google.com (Petar Petrov)tRpcExceptionc
BseZ
dZRS(
s4Exception raised on failed blocking RPC method call.(t__name__t
__module__t__doc__(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyR.s

tServicec
Bs2eZ
dZd
�Zd�Zd�Zd�ZRS(sj
Abstract base interface for protocol-buffer-based RPC services.

  Services themselves are abstract classes (implemented either by servers or as
  stubs), but they subclass this base interface. The methods of this
  interface can be used to call the methods of the service without knowing
  its exact type at compile time (analogous to the Message interface).
  c
Cs
t�
d
S(s$Retrieves this service's descriptor.N(
tNotImplementedError(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt
GetDescriptor=sc
Cs
t�
d
S(s>Calls a method of the service specified by method_descriptor.

    If "done" is None then the call is blocking and the response
    message will be returned directly.  Otherwise the call is asynchronous
    and "done" will later be called with the response value.

    In the blocking case, RpcException will be raised on error.

    Preconditions:
    * method_descriptor.service == GetDescriptor
    * request is of the exact same classes as returned by
      GetRequestClass(method).
    * After the call has started, the request must not be modified.
    * "rpc_controller" is of the correct type for the RPC implementation being
      used by this Service.  For stubs, the "correct type" depends on the
      RpcChannel which the stub is using.

    Postconditions:
    * "done" will be called when the method is complete.  This may be
      before CallMethod() returns or it may be at some point in the future.
    * If the RPC failed, the response value passed to "done" will be None.
      Further details about the failure can be found by querying the
      RpcController.
    N(
R(tselftmethod_descriptortrpc_controllertrequesttdone((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt
CallMethodAsc
Cs
t�
d
S(s�
Returns the class of the request message for the specified method.

    CallMethod() requires that the request is of a particular subclass of
    Message. GetRequestClass() gets the default instance of this required
    type.

    Example:
      method = service.GetDescriptor().FindMethodByName("Foo")
      request = stub.GetRequestClass(method)()
      request.ParseFromString(input)
      service.CallMethod(method, request, callback)
    N(
R(RR((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytGetRequestClass]s
c
Cs
t�
d
S(s
Returns the class of the response message for the specified method.

    This method isn't really needed, as the RpcChannel's CallMethod constructs
    the response protocol message. It's provided anyway in case it is useful
    for the caller to know the response type in advance.
    N(
R(RR((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytGetResponseClassls(R
RRRRR
R(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyR3s
			t
RpcControllerc
BsMeZ
dZd
�Zd�Zd�Zd�Zd�Zd�Zd�Z	RS(s�
An RpcController mediates a single method call.

  The primary purpose of the controller is to provide a way to manipulate
  settings specific to the RPC implementation and to find out about RPC-level
  errors. The methods provided by the RpcController interface are intended
  to be a "least common denominator" set of features which we expect all
  implementations to support.  Specific implementations may provide more
  advanced features (e.g. deadline propagation).
  c


Cs
t�
d
S(s�Resets the RpcController to its initial state.

    After the RpcController has been reset, it may be reused in
    a new call. Must not be called while an RPC is in progress.
    N(
R(
R((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytReset�sc


Cs
t�
d
S(s>
Returns true if the call failed.

    After a call has finished, returns true if the call failed.  The possible
    reasons for failure depend on the RPC implementation.  Failed() must not
    be called before a call has finished.  If Failed() returns true, the
    contents of the response message are undefined.
    N(
R(
R((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytFailed�sc


Cs
t�
d
S(sEIf Failed is true, returns a human-readable description of the error.N(
R(
R((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt	ErrorText�sc


Cs
t�
d
S(s
Initiate cancellation.

    Advises the RPC system that the caller desires that the RPC call be
    canceled.  The RPC system may cancel it immediately, may wait awhile and
    then cancel it, or may not even cancel the call at all.  If the call is
    canceled, the "done" callback will still be called and the RpcController
    will indicate that the call failed at that time.
    N(
R(
R((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytStartCancel�s	c
Cs
t�
d
S(sW
Sets a failure reason.

    Causes Failed() to return true on the client side.  "reason" will be
    incorporated into the message returned by ErrorText().  If you find
    you need to return machine-readable information about failures, you
    should incorporate it into your response protocol buffer and should
    NOT call SetFailed().
    N(
R(Rtreason((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt	SetFailed�s	c


Cs
t�
d
S(s�Checks if the client cancelled the RPC.

    If true, indicates that the client canceled the RPC, so the server may
    as well give up on replying to it.  The server should still call the
    final "done" callback.
    N(
R(
R((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt
IsCanceled�sc
Cs
t�
d
S(s�
Sets a callback to invoke on cancel.

    Asks that the given callback be called when the RPC is canceled.  The
    callback will always be called exactly once.  If the RPC completes without
    being canceled, the callback will be called after completion.  If the RPC
    has already been canceled when NotifyOnCancel() is called, the callback
    will be called immediately.

    NotifyOnCancel() must be called no more than once per request.
    N(
R(Rtcallback((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pytNotifyOnCancel�s(
R
RRRRRRRRR(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyRvs
		
		
			t
RpcChannelc
BseZ
dZd
�ZRS(s4Abstract interface for an RPC channel.

  An RpcChannel represents a communication line to a service which can be used
  to call that service's methods.  The service may be running on another
  machine. Normally, you should not use an RpcChannel directly, but instead
  construct a stub {@link Service} wrapping it.  Example:

  Example:
    RpcChannel channel = rpcImpl.Channel("remotehost.example.com:1234")
    RpcController controller = rpcImpl.Controller()
    MyService service = MyService_Stub(channel)
    service.MyMethod(controller, request, callback)
  c
Cs
t�
d
S(sb
Calls the method identified by the descriptor.

    Call the given method of the remote service.  The signature of this
    procedure looks the same as Service.CallMethod(), but the requirements
    are less strict in one important way:  the request object doesn't have to
    be of any specific class as long as its descriptor is method.input_type.
    N(
R(RRR	R
tresponse_classR((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyR�s	(R
RRR(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyR�sN(Rt
__author__t	ExceptionRtobjectRRR(((s;/usr/lib/python2.7/site-packages/google/protobuf/service.pyt<module>)s
CS